CONTENTS
Structural and optical properties of zinc sulphide–polyvinyl alcohol (ZnS–PVA) nanocomposite thin films: effect of Zn source concentration
| |
U Baishya and D Sarkar
| |
Preparation of novel polymer–metal oxide nanocomposites with nanophase separated hierarchical structure
| |
K
| |
Morphology, thermal, electrical and electrochemical stability of nano aluminium-oxide-filled polyvinyl alcohol composite gel electrolyte
| |
Navin Chand, Neelesh Rai, S L Agrawal and S K Patel
| |
Dielectric behaviour of nano-crystalline spinel Ni0×2Ca0×8Fe2O4 and their nano-composite with polypyrrole
| |
Arun S Prasad, S
| |
Fabrication and characterization of Ti3SiC2–SiC nanocomposite by in situ reaction synthesis of TiC/Si/Al powders
| |
Baoyan Liang, Mingzhi Wang, Xiaopu Li and Yunchao Mu
| |
Solvothermal synthesis and characterization of acicular a-Fe2O3 nanoparticles
| |
S Basavaraja, D
| |
Barium ferrite nanoparticles prepared by self-propagating low-temperature combustion method and its characterization
| |
P M Prithviraj Swamy,
| |
Synthesis and characterization of zinc ferrite nanoparticles obtained by self-propagating low-temperature combustion method
| |
P M Prithviraj Swamy,
| |
Synthesis of one-dimensional N-doped Ga2O3 nanostructures: different morphologies and different mechanisms
| |
S C Vanithakumari and K K Nanda
| |
Synthesis and characterization of mixture of nanozirconia and nanosilica obtained from commercially available zircon flour by sol–gel method
| |
A J K Prasad, S M Shashidhara and B K Muralidhara
| |
Influence of preparation method on structural and magnetic properties of nickel ferrite nanoparticles
| |
Binu P Jacob, Ashok Kumar, R P Pant, Sukhvir Singh and E M Mohammed
| |
Photoconductivity and high-field effects in amorphous Se83Te15Zn2 thin film
| |
S Shukla and
| |
Using speciation diagrams to improve synthesis of magnetic nanosorbents for environmental applications
| |
A F C Campos, R Aquino, T A P G Cotta, F A Tourinho and J Depeyrot
| |
Effect of aging on copper nanoparticles synthesized by pulsed laser ablation in water: structural and optical characterizations
| |
R K Swarnkar, S C Singh and R Gopal
| |
Hydrothermal synthesis of NaEuF4 spindle-like nanocrystals
| |
Zhi-Jun Wang, Feng Tao, Wei-Li Cai, Lian-Zeng
| |
Laser annealing of sputter-deposited a-SiC and a-SiCxNy films
| |
M A Fraga, M Massi, I C Oliveira, F D Origo and
| |
Preparation and characterization of LaNiO3 films grown by metal–organic deposition
| |
C-W Nahm
| |
Dielectric and impedance spectroscopic studies of (Sr1–xPbx)TiO3 glass ceramics with addition of Nb2O5
| |
C R Gautam, Devendra Kumar and Om Parkash
| |
Dielectric behaviour of Pb-substituted BZT ceramics
| |
Parveen Kumar, Sangeeta Singh, J K Juneja, K K Raina and Chandra Prakash
| |
High performance of low cost soft magnetic materials
| |
Josefina M Silveyra, Emília Illeková, Marco Coïsson, Federica Celegato, Franco Vinai, Paola Tiberto, Javier A Moya and Victoria J Cremaschi
| |
Influence of temperature on structural and magnetic properties of Co0×5Mn0×5Fe2O4ferrites
| |
S M Ramay, Murtaza Saleem, S Atiq, Saadat A Siddiqi,
| |
Effect of thermomechanical processing on evolution of various phases in Ti–Nb alloys
| |
S Banumathy, K
| |
Annealing twins in a multifunctional beta Ti–Nb–Ta–Zr–O alloy
| |
W Y Guo and J Sun
| |
Heat treatment and effects of Cr and Ni in low alloy steel
| |
Mohammad Abdur Razzak
| |
Low temperature enhanced ductility of friction stir processed 5083 aluminum alloy
| |
Ehab A El-Danaf, Magdy M El-Rayes and Mahmoud S Soliman
| |
Small-angle scattering from GP zones in Al–Cu alloy
| |
K T Kashyap and Praveennath G Koppad
| |
Calorimetric studies of non-isothermal crystallization in amorphous CuxTi100–xalloys
| |
N Mehta, K Singh and N
| |
Effect of aging treatment on wear properties and electrical conductivity of Cu–Cr–Zr alloy
| |
Ibrahim Sağlam, Dursun Özyürek and Kerim Çetinkaya
| |
Effect of grain boundary misorientation on discontinuous precipitation in an AZ91 alloy
| |
H Azzeddine,
| |
Rapid heating effects on grain-size, texture and magnetic properties of 3% Si non-oriented electrical steel
| |
Jian Wang, Jun Li, Xinfeng Wang, Xiaochuan Mi and Shengen Zhang
| |
Effect of Zr on dielectric, ferroelectric and impedance properties of BaTiO3 ceramic
| |
Sandeep Mahajan, O P Thakur, Chandra Prakash and K Sreenivas
| |
Effect of substitution of titanium by magnesium and niobium on structure and piezoelectric properties in (Bi1/2Na1/2)TiO3 ceramics
| |
Zhou Chang-Rong, Liu Xin-Yu, Li Wei-Zhou and Yuan Chang-Lai
| |
Mathematical aspects of Rietveld refinement and crystal structure studies on PbTiO3ceramics
| |
Niranjan Sahu and
| |
Ce-doped LCMO CMR manganites: a consequence of enhanced Tc and TIM
| |
D K Mishra, D R Sahu, P K Mishra, S K Singh, B K Mohapatra and B K Roul
| |
Formation of ternary Mg–Cu–Dy bulk metallic glasses
| |
X F Wu, Y Kang, F F Wu, K Q Qiu and L K Meng
| |
Effects of MO (M = Mg, Ca, Ba) on crystallization and flexural strength of semi-transparent lithium disilicate glass–ceramics
| |
Zhiwei Luo, Junlin Zhou, Jing Li, Changjian Zhang and Anxian Lu
| |
Superconducting state parameters of ternary metallic glasses
| |
Aditya M Vora
| |
Effect of complexing salt on conductivity of PVC/PEO polymer blend electrolytes
| |
S Rajendran,
| |
Preparation of semi-IPN(BA–VAc–VAE) by emulsion polymerization and its properties investigation
| |
Shi Luo, Zonghui Liu, Bailing Liu and Qi Liu
| |
Synthesis and characterization of polycaprolactone/
acrylic acid (PCL/AA) hydrogel for controlled drug delivery | |
Nazar Mohammad Ranjha, Jahanzeb Mudassir and Sajid Majeed
| |
Tribological effects of polymer surface modification through plastic deformation
| |
K O Low and K J Wong
| |
Synthesis, characterization and magnetic properties of polyaniline/g-Fe2O3composites
| |
Syed Khasim, S C Raghavendra, M Revanasiddappa, K C Sajjan, Mohana Lakshmi and Muhammad Faisal
| |
Drilling analysis of coir–fibre-reinforced polyester composites
| |
Effect of ZnO loading technique on textural characteristic and methyl blue removal capacity of exfoliated graphite/ZnO composites
| |
Xueqing Yue, Wenyan Duan, Yan Lu, Fucheng Zhang and Ruijun Zhang
| |
Effect of fibre content and alkali treatment on mechanical properties of Roystonea regia-reinforced epoxy partially biodegradable composites
| |
Govardhan Goud and R
| |
Changes in microstructural parameters of NB4D2 silk fibres due to electron irradiation: X-ray line profile analysis
| |
Sangappa,
| |
Hot pressing effect on (Bi0×25Sb0×75)2Te3 mechanical and thermoelectric properties
| |
G Kavei, K Ahmadi and A Seyyedi
| |
Synthesis and in situ mechanism of nuclei growth of layered double hydroxides
| |
H S Panda, R Srivastava and D Bahadur
| |
Synthesis, characterization and catalytic performance of a novel zeolite ITQ-2-like by treating MCM-22 precursor with H2O2
| |
Ling Xu, Haijun Xing, Shujie Wu, Jingqi Guan, Ming Jun Jia and
| |
Effect of thin Mo2C layer on thermal stability of Si/SiO2/Ti/Cu system
| |
C C Tripathi, Mukesh Kumar and Dinesh Kumar
| |
Structural, elastic and thermodynamic properties of Ti2SC
| |
Hongzhi Fu, WenFang Liu and Tao Gao
| |
DLTS study of annihilation of oxidation induced deep-level defects in Ni/SiO2/n-Si MOS structures
| |
Estimation of vapour pressure and partial pressure of subliming compounds by low-pressure thermogravimetry
| |
G V Kunte, Ujwala Ail, P K Ajikumar, A K Tyagi, S A Shivashankar and A M Umarji
| |
Solid-state titania-based gas sensor for liquefied petroleum gas detection at room temperature
| |
B C Yadav, Anuradha Yadav, Tripti Shukla and Satyendra Singh
| |
Fermi-edge singularity in photoluminescence spectra of modulation-doped AlGaAs/InGaAs/GaAs quantum wells
| |
K Gopalakrishna Naik, K S R K Rao, T Srinivasan and R Muralidharan
| |
Blue-shifted photoluminescence of Alq3 dispersed in PMMA
| |
J G Mahakhode, S J Dhoble, C P Joshi and S V Moharil
| |
Spray-drying of alumina powder for APS: effect of slurry properties and drying conditions upon particle size and morphology of feedstock
| |
Bai Yu, Yang Jian Feng, Lee Soo Wohn, Chen Huang, Yu Fang Li and Zhang Jia
| |
Effect of size of fly ash particle on enhancement of mullite content and glass formation
| |
Parveen Sultana, Sukhen Das, Biswajoy Bagchi, Alakananda Bhattacharya, Ruma Basu and Papiya Nandy
| |
Kaliophilite from fly ash: synthesis, characterization and stability
| |
Uptake of permanganate from aqueous environment by surfactant modified montmorillonite batch and fixed bed studies
| |
N Mahadevaiah, B Vijayakumar, K Hemalatha and B
| |
Preparation of an efficient humidity indicating silica gel from rice husk ash
| |
J P Nayak and J Bera
| |
Improvement of multicrystalline silicon wafer solar cells by post-fabrication wet-chemical etching in phosphoric acid
| |
A Mefoued, M Fathi, J Bhatt, A Messaoud, B Palahouane and
| |
Nitrates–melt synthesized LiNi0×8Co0×2O2 and its performance as cathode in Li-ion cells
| |
M Sathiya, K Hemalatha, K Ramesha, A K Shukla and A
| |
Corrosion resistant Zn–Co alloy coatings deposited using saw-tooth current pulse
| |
Effect of heat treatment temperature on microstructure and electrochemical properties of hollow carbon spheres prepared in high-pressure argon
| |
Boyang Liu, Yun Zhou, Dechang Jia, Pengjian Zuo, Yingfeng Shao and Jingwei Zhang
| |
Biodegradable poly(lactic acid) microspheres containing total alkaloids of Caulis sinomenii
| |
Wen Zhang, Xiaojie Lin and Xingxiang Zhang
| |
Tissue-engineered triphasic ceramic coated hydroxyapatite induced bone formation and vascularization at an extraskeletal site in a rat model
| |
Manitha B Nair, H K Varma, P V Mohanan and Annie John
| |
Influence of preparation method on hydroxyapatite porous scaffolds
| |
Evaluation of starch based cryogels as potential biomaterials for controlled release of antibiotic drugs
| |
L P Bagri, J Bajpai and A K Bajpai
| |
Synthesis of hydroxyapatite nanopowders by sol–gel emulsion technique
| |
K Saranya, Meenal Kowshik and Sutapa Roy Ramanan
| |
Subject index
| |
Author index
| |
Volume Contents
|
